RAILROAD OPERATIONS

Road of Rails

The secret to a train's great efficiency is its road of rails. There is very little resistance to moving anything on rails. The steel wheel on a steel rail takes up very little room. For example, a train wheel on a rail occupies the space of a dime, whereas a truck tire occupies the space of a paper dollar! An eighteen-wheel truck takes up eighteen paper dollars worth of road space. The eight-wheel rail car takes up only the space of eight dimes. And the rail car can carry many times more weight than the truck.

Rails

Rails are made of high-grade steel and often weigh between 112 to 145 pounds per yard. They can stand the weight of 75,000 pounds per square inch! Rails were and sometimes still are manufactured at 39' long. These sections are bolted together. On long distances, rails are welded together for a smoother ride. This type of rail is sometimes called ribbon rail or the slang term "velvet."

The rails are 4' 8½" apart. The distance is called "gauge" or "standard gauge." Because almost all railroads in North America are "standard gauge," a railroad car can travel anywhere there is a railroad. This gauge was first used on track to experiment with the first steam locomotives in England. It became the predominant gauge in the United States when President Lincoln ordered the first transcontinental built at 4' 8 ½". The railroads themselves proclaimed it the nation's standard in 1886.

Rails are held together by ties. Most ties are made of treated wood, cement, and sometimes steel. The rails are held on ties with spikes and an undercarriage called the tie plate. Railroads also now use a spring clamp device to hold the rail rather than plates and spikes in heavy traffic areas. The clamps and spikes keep the rails from moving outward as the weight of the train keeps them on the ties.

Schematic

Ballast is needed under and between the ties. A bed of crushed rock keeps the track higher than the surrounding landscape. It also provides a smoother ride and helps drain rain from the track.

Tracks are often "superelevated" on curves. Superelevation is the making of the outside rail on a curve higher than the inside one. The superelevation permits trains to negotiate the curve more safely at a higher speed.

Today, long stretches of track can be built, changed, or repaired quickly by machines. In fact, some railroads have machines to clean and renew the ballast. They also have "inspection cars" to catch worn-out and defective or damaged track.

Traffic

The frequency of trains on a track is regulated by the dispatcher. The engineer and conductor know when and how far to move their train through signals and other modern forms of communication (radio and cell phone).

On many main-line tracks, there are tall metal posts with red, amber, and green lights at the top. The distance between one signal and another is called a "block." Only one train at a time is permitted to occupy one block. When the conductor and engineer see a green light, they know that they can safely enter that block. An amber light tells them that there is a train two or so blocks up the line. They cannot move their train past a red light. They must wait for the signal to change. The signals also operate interlockings where one track crosses another. They permit only one train at a crossing at a time.

Some tracks are regulated by Centralized Traffic Control (CTC). The dispatcher can be miles away and see a track and various trains' positions on it through a large screen. Through computers, radio, and microwave communication, the dispatcher can safely control movement over hundreds of miles of track. Block signals, CTC and radio communications increase both the safety and efficiency of railroad operations.

Train

What's a train? That seems like a foolish question. But there is an official definition of a train. A train is one or more locomotives coupled together, with or without cars, and displaying markers. (Markers are a front white headlight and a rear device or FRED [Flashing Rear End Device].)

The Locomotive

Diesel-Electric locomotives called "road-switchers" are the most common in service today. A few steam locomotives are still used for tourist lines and for special occasions. Modern locomotives look very similar, and it takes time to learn the few distinguishing characteristics. There are two major locomotive manufacturing companies in the United States: Electro-Motive Division of General Motors and General Electric.

Most diesel engines have from 8 to 20 cylinders. They are designed for low maintenance and can last from 20 to 25 years. Most have direct current (DC) traction motors. More modern ones operate on alternating current (AC). The traction motor is the electric motor that turns the locomotive's wheels. These modern machines can generate over 4,000 horsepower and have a better adhesion to the track. In other words, they can pull more, and the wheels do not slip on the track. The two major companies are developing 6,000 horsepower units.

Railroad Freight Cars

There are over 1,500,000 railroad cars in use in the United States. Each has two 4-wheel trucks and some can carry or weigh well over 100 tons. Keeping the width at 10' 8" and height at or under 15' 1", they can move anywhere in the country. Here are some common freight cars and their weights.

Weights of Freight Cars

Hopper

89 tons

Lumber

64

Refrigerator

67

Chemical Tank

56

Gondola

100

Pressurized Tank

60

Auto Rack

24 tons

 

 

There is the current trend for private companies to own railroad cars. In that way, they are assured of having them for use at any time. They do not have to share them with others.

Types of Freight Trains

A "unit train" is made up of one particular type of car and travels back and forth between the same two loading and unloading places. The most common are trains of hopper cars loading coal at a mine and delivering it to a utility plant.

Intermodal

Intermodal has also become popular. Trailers are loaded on flat cars (TOFC = trailer on flat car) and taken in large numbers for long distances by train. Sealed containers (COFC = container on flat car) travel the same way. In fact, containers are taken off a ship at an Atlantic port and transported across the United States to another ship at a Pacific port. This "land bridge" saves fuel and time and avoids highway congestion. It is cheaper than keeping them on a ship at sea.

A more recent invention is called the RoadRailer. The RoadRailer is a trailer that travels on highways and on rails equally well and does not need a flat car. RoadRailers save the time of loading and unloading on a flat car. RoadRailers take advantage of the best uses of railroad and road.

Amtrak

Amtrak is the more common name for the National Rail Passenger Corporation. Amtrak was formed in 1971 to take over nationwide passenger service from the privately operated railroads. With the exception of commuter lines out of major cities and a few privately owned trains, Amtrak is the only long-distance rail passenger service in the United States.

Amtrak serves many major cities and towns throughout the country. It has often retained the names of famous trains of yesteryear. Some schedules are daily while others are tri-weekly. There are many trains that serve the line from Washington, DC, to Boston each day. In fact, Amtrak owns the tracks between those two cities, but runs its other trains on rails owned by the freight hauling companies.

Amtrak has its own fleet of locomotives and passenger cars. It has diesel electric locomotives for servicing most areas. Between Boston and Washington, DC, it uses efficient electric engines. Amtrak has recently acquired a Genesis locomotive which has diesel electric power and can get electricity from a third rail as it approaches New York City. In that way, it does not have to use its diesel engine.

Amtrak passenger cars are very comfortable. Most east coast trains originating in New York City use single-level cars because of low clearances in tunnels. Other routes use bi-level cars. Passengers occupy the top level, and the lower is used for storage, lavatories and lounges. The top level provides an excellent vantage point to look at scenery.

Common Amtrak Cars:

Coach: Seats over 80 people in comfortable seats with plenty of leg room. Passengers have racks overhead, and the storage area on the lower level is accessible. There are lavatories with showers also on the lower level.

Sleeper: On bi-level cars, there are three types of sleeping accommodations. There are rooms for the physically challenged and luxury class with built-in vanities, toilets and showers. Regular first-class provides an upper and lower berth (bunk) without lavatory facilities.

On New York City trains, Amtrak has recently installed Viewliner Sleepers. The Viewliner has similar physically challenged and luxury compartment features as the bi-level cars. Regular first-class has a toilet and sink in the compartments.

Sleeping car accommodations afford the utmost of privacy, and dining car meals are included in the ticket price. Each car has a trained attendant at the passengers' service.

Lounge car: The upper level of the lounge car has large picture windows and swivel seats. The lower level has tables and an area to purchase snacks.

Dining car: Excellent and affordable meals are prepared on the lower level of the dining car. Forty or more people can enjoy both the cuisine and scenery on the upper level. Meals are included in first-class tickets. They are also available to coach passengers. Having dinner on a train is a wonderful experience.

Couplers and Brakes

Railroad cars are held together by couplers. Cars can couple and hold together automatically when they meet at 3 miles per hour. A lever is pulled to open the coupler as the cars are pulled apart.

There is still a small space as the couplers are closed. This small gap provides a "play" or "slack action" between the cars. The coupler mechanism extends under the length of the car to cushion from shocks of coupling too fast.

Trains use two types of brakes. The locomotives' traction motors can serve as a brake. By moving a switch, the motor becomes a generator which produces electricity. Along with creating heat energy, the motors slow down the train.

The cars have air brakes. The locomotive has an air compressor which feeds the air hose with air at 70 to 90 pounds per square inch (psi). (Passenger trains require 110 psi.) The brakes are off, and the train rolls freely as long as the engineer keeps the air pressure up. To stop the train, the engineer lowers the pressure in the line or releases all air quickly in an emergency. This system dates back to over a century ago. It is considered fail safe: if an air hose breaks or there is a leak, the train will stop automatically.

Since the train's brakes must create their own resistance on the wheel, it takes a long time to stop a train. That is why extreme caution is needed at grade crossings. A car can easily and quickly stop for a train to pass. The train cannot stop in time to avoid a collision with a car.

Freight Yards and Sidings

Freight cars are coupled to each other and separated mostly at yards with many tracks. They are switched onto trains going to specific destinations. There are two chief types of freight yards: flat and hump. In a flat yard, the cars are pushed or pulled together or apart by a locomotive. In a hump yard, cars are pushed to the top of a hill or "hump." They then are pulled by gravity to couple to or separate from other cars. The hump rail yard saves on locomotive movement and fuel. In a hump yard there are usually "automatic retarders" which slow cars to 3 mph to prevent a collision.

Factories, storage buildings and distributors load and unload cars on sidings. They try to do these tasks as quickly as possible. A "bill of lading" is the contract to carry the items. A "waybill" keeps an account of the origin and destination of the shipment as well as charges, contents, and other important information.

Railroads use computers and other high-tech devices to account for freight cars. They can tell within an hour the location of any freight car in the country. Railroading is an unique blend of heavy steel and high tech.


CONTINUE  

Federal Railroad Administration

4/17/01 10:49:22 AM