|
Pictured above is the Vickers .303 inch Machine Gun Mk 1
on a .303 inch Machine Gun Mk IV 'B' Mounting Tripod in its
1914-1918 configuration. Note the Mk 1 muzzle attachment
and the emergency mount below the water-jacket. The riveted
belt is in position and is being fed from the No.8 belt box.
The gun weighs approximately 42.5 lbs with 7.5 pints of
cooling water to prevent overheating. The actual mounting weight
is 48 lbs. Not only did they have to carry the gun and tripod,
the poor soldiers also had to carry the belt boxes, which weighed
22 lbs with 250 rounds of ammunition in each belt. The gun weight could
vary according to the type of barrel casing
and whether 'lightening' had been carried out. The overall length
of the gun was 3 feet 8 inches and it's cyclic rate of fire was
between 450 and 600 rounds of ammunition per minute. Therefore,
while one member of the eight man gun team carried the gun, another
would carry the tripod and the other six would have laden themselves
down with belt boxes to be sure they would be able to carry out
an effective performance once the gun was set up.
The operation of the gun was recoil and fuzee spring.
Many MGC/OCA members own Vickers guns and in the case of American and Canadian members, actually
fire them. The OCA is currently trying to purchase a Vickers. If you would like to make a donation
towards this, the Honorary Secretary will be pleased to hear from you.
We are also hoping to participate and help organise a Vickers Shoot in 2002.
Send email enquiries regarding membership, events,
"Emma Gee," and all
administration to: [email protected]
Copyright Machine Gun Corps Old Comrades' Association.
Articles written by Judith Lappin and Keith Stephenson
|