Forum Archive #3

Military ForumOther Forum Archives
Code of Conduct

 Paul Lakowski:
re: ERA on Soviet/Russian tanks

The detonation of the explosive is fast enought to propelle the plate to maximum velocity[ 200-300m/s] in a few microseconds[ 1/1,000,000 second] . The effect of the rod through plate takes ~100 micro seconds . The overall reduction in penetration covers a wide range and is dependent on plate angle. In Steve Zaloga[Zawoga] new book the values quoted range from 120-280mm for the K-5 arrangement Vs KE warheads , but tests on this material confirm several things.

....Ogorkiewicz reports a value of 1.7 x the plate thickness � Cos plate angle Vs APFSDS. in the tests a figure of 1.65 is reported for plates moving towards the armor while 2.0 x the plate thickness for plates moving away from the armor. Test also show a hugh scatter on the results with about 2/3 � 1/3 the figures , thus if the maximum is 28cm then the real figure is probably about 21cm �7cm.

BTW Russian Kontakt armor has two panels that are lined with explosive behind the plate and explode outward offering about 5-6cm KE resistance to the early T-64 BV, T-80BV, T-72 AV & BV.

Sun Apr 9 23:07:45 2000


Back to page 

Garth Schofield ERA on Soviet/Russian tanks (Apr, 9)
 Amedeo Matteucci re: ERA on Soviet/Russian tanks (Apr, 9)
  •  Paul Lakowski re: ERA on Soviet/Russian tanks (Apr, 9)
  • Robert A. Mosher re: ERA on Soviet/Russian tanks-YES (Apr, 10)

    Records: 4

    Threads navigation:  186 <<<  185  >>> 184