The final version of the new Watt engine (please see
the animation) worked in 1778, and it consumed 1/3 of the steam that the
Newcomen engine used. This engine worked a crossbeam for pumping.
The cylinder was closed (by a cap) and heated by a warm steam jaket. The
condenser, positioned underground, was cooled and vacuum operated (by a pump).
When the piston reached the top of its stroke the exhaust-valve opened and a
partial vacuum was produced below the piston (inside the cylinder
communicating to the condenser). Above the piston, at the same time, the
entrance of steam helped the atmospheric pressure to drive the piston down.
On this stroke the crossbeam raised water in the pump. When the piston
reach the bottom of the stroke the inlet valve closed and an equilibrium
valve opened to allow steam to pass from above to below the piston.
The engine piston (now with the same pressure above and below) was driven
up by the crossbeam and the descent of the very, very heavy pump piston and
rod.
Note the presence of the condenser and the warm steam jacket that surrounds
the cylinder.