Pennsylvania Highways
Pennsylvania Manual on Uniform
Traffic Control Devices


Maintaining a consistency of highway signage is an important aspect of the Federal Highway Administration.  It produces a publication entitled the Manual on Uniform Traffic Control Devices which lists every type of sign that can be installed on a highway or street in the United States.  This manual is the basis for states to build upon to by adding their own signs.  Here are some of the signs that are unique to the Keystone State.

  1. REGULATORY SIGNS
  2. WARNING SIGNS
  3. CONSTRUCTION AND MAINTENANCE GUIDE SIGNS
  4. ROUTE MARKERS AND AUXILIARY MARKERS
  5. DESTINATION AND DISTANCE SIGNS
  6. INFORMATION SIGNS
  7. GUIDE SIGNS
  8. SCHOOL SIGNS
  9. TRAFFIC SIGNALS

REGULATORY SIGNS

Regulatory Signs

Stop Sign Removed From Side Street Stop Sign Removed from Side Street (R1-4)
Justification: 
1.  The Stop Sign Removed from Side Street sign shall be authorized for use to advise local drivers that the stop sign on the side street has been removed.  The R1-4 sign should be removed after six weeks.
2.  In the particular case when stop signs are to be reversed, a temporary multiway stop intersection should normally first be authorized for approximately six weeks for those intersections with a combined average daily traffic volume in excess of 500 vehicles.  After the original stop signs are removed, the R1-4 sign shall be authorized for six weeks beneath remaining stop signs.

Placement:  When
used, the R1-4 sign shall be placed beneath appropriate stop signs for educational purposes
.
Preferential Highway Preferential Highway (R3-16)
Justification: 
a.  The Preferential Highway sign shall be authorized for use in advance of a section of highway or a ramp to an expressway or freeway where travel on the specified highway is restricted to a specific class or classes of vehicles and/or to vehicles having a minimum of occupants.
Format:  The message of Sign R3-16 should have the following sequence.
TOP LINES = applicable vehicles (such as BUSES ONLY, BUSSES AND CARPOOLS, CARPOOLS ONLY)
THIRD LINE = Minimum number of persons in the vehicle
BOTTOM LINE = applicable time and day (such as 6 a.m. - 10 p.m. MON-FRI)
An additional message may be added to the top of the sign to identify the preferential highway or ramp and the distance to the restrictions.
Placement:  The R3-16 sign may be post mounted at the side of the road or overhead in advance of the restricted highway or ramp to the restricted highway.
All Turns From Right Lane All Turns From Right Lane (R4-15)
Justification:  The All Turns From Right Lane sign shall be authorized for use on those multilane highways where left turns and U-turns are prohibited but where these movements can be indirectly accomplished by making a right turn.
Placement:  The R4-15 sign shall be placed at intervals throughout the section of highway where left turns and U-turns are prohibited and in advance of all right-hand off-ramps where left turns and U-turns can be indirectly accomplished by making a right turn.
Size:  The standard size R4-15 sign shall be 96 inches by 48 inches.  The 48-inch by 60-inch size may be used where there is insufficient lateral space to erect the larger size.
All Turns All Turns (R4-16)
Justification: 
The All Turns sign shall be authorized to indicate the location of a right-hand off-ramp where left turns and U-turns are prohibited but may be indirectly accomplished by making a right-turn.  Street or road names, or traffic route numbers may be included directly above this sign message.
Placement: 
The R4-16 sign shall be placed in the gore of the off-ramp.
Emergency and Authorized Vehicles Only Emergency and Authorized Vehicles Only (R5-4)
Justification:  T
he Emergency and Authorized Vehicles Only sign shall be authorized for use to mark median crossovers for the use indicated on limited access highways.  This sign should be placed on the far side of the crossover.
Semitrailer Minimum Underclearance Semitrailer Minimum Underclearance (R5-7)
Justification: 
The Semitrailer Minimum Underclearance sign shall be authorized when it has been determined that it is necessary to prohibit semitrailers with an underclearance less than a specified dimension.  This restriction would be applicable on crest vertical curves, especially over a railroad grade crossing.
Placement: 
The R5-7 sign should be located immediately in advance of the section of highway to which it applies.  In the case of an extended distance between the restriction and the nearest intersections, a second sign should be placed not more than 25 feet beyond the intersection so as to be clearly visible from all vehicles about to enter the highway with the restriction.
Runaway Vehicles Only Runaway Vehicles Only (R45-8)
Justification: 
The Runaway Vehicles Only sign is authorized for use on runaway truck ramps to prohibit vehicles other than runaway vehicles from using the ramp.  The Advance Runaway Truck Ramp Sign (W7-3) and the Runaway Truck Ramp Sign (W7-3-1) should also be used to provide advance warning of the ramp.
Placement: 
The R5-8 sign shall be placed near the entrance of the ramp.  The sign should be placed on the right side of the ramp and set at an angle of approximately 45o with a line parallel to the edge of the ramp.
Snow Emergency Route Snow Emergency Route (R4-16)
The Snow Emergency Route sign shall be authorized for use at the entrance to limited access highways which have officially been designated as snow emergency routes in accordance with Chapter 213 (relating to snow emergency routes).
Flammable Liquid and Explosive Loads Prohibited in Tunnel Flammable Liquid and Explosive Loads Prohibited in Tunnel
(
R5-20
)
Justification: 
The Flammable Liquid and Explosive Loads Prohibited in Tunnel sign shall be authorized for use when vehicles carrying flammable liquid or explosive loads are prohibited within a tunnel.
Placement: 
The R5-20 sign shall be placed in advance of the tunnel entrance.
Flammable Liquid and Explosive Loads Must Use Next Exit Flammable Liquid and Explosive Loads Must Use Next Exit
(
R5-20-1
)
Justification: 
The Flammable Liquid and Explosive Loads Must Use Next Exit sign shall be authorized for use in advance of a designated section of limited access highway where vehicles carrying flammable liquid or explosive loads are prohibited.  It shall be used in conjunction with Flammable Liquid and Explosive Loads Prohibited in Tunnel sign.
Placement: 
The R5-20-1 sign shall be placed in advance of the last exit prior to entering the section of highway where said vehicles are prohibited.  Care should be taken in selecting the exit to assure there are no restrictions affecting the vehicles that must use it.
Temporary No Parking Temporary No Parking (R7-10)
Justification: 
The Temporary No Parking sign shall be authorized for use as provided in §§ 211.231-211.233 of this title (relating to justification and description; placement; and size) when local authorities deem it necessary to prohibit parking for a short time on any street or highway.  Care shall be taken to see that the signs are removed when their need no longer exists.
Placement: 
Since the use of this sign is temporary it may be made of cardboard and attached to poles, trees, or other existing supports at convenient heights, angles, and locations.
No Stopping On Bridge No Stopping On Bridge (R8-20)
Justification: 
The No Stopping on Bridge sign shall be authorized for use in rural areas as provided in § § 615.221-615.223 of this Title (relating to stopping, standing, and parking signs) when motorists have a tendency to stop or park on the bridge for purposes other than emergencies.
Size:  The standard size for expressways shall be 30 inches by 24 inches.
Turn With Care Turn With Care (R10-10-2)
Justification: 
The Turn With Care sign shall be authorized for use in combination with a Left Turn Signal sign (R10-10) as the second message in an internally illuminated, changeable message sign, and is to be located close to a specific signal controlling a left-turning movement when the left-turning movement is exclusive during one phase but not denied in another phase of the traffic-control signal operation.
Size:  The standard size of R10-10-2 shall be 24 inches by 30 inches.  The standard size for overhead installations shall be 30 inches by 36 inches.
Opposing Traffic Has Extended Green Opposing Traffic Has Extended Green (R10-20)
Justification: 
The Opposing Traffic Has Extended Green shall be authorized for use with a traffic-control signal installation where opposing traffic has a lagging green.  It shall be used to advise the motorist facing the sign that the opposing traffic will continue to move although he has a red signal indication.
Placement:  The R10-20 sign should be near and facing the approach lanes of traffic, which might presumably conflict with traffic entering the intersection on a lagging green signal indication, on a signal post or pedestal beneath the signal.  It may also be placed in an overhead position on a signal mast arm or span wire.
Wait For Green Wait For Green (R10-21)
Justification: 
The Wait For Green sign shall be authorized for use at traffic-control signal installations where a tendency is noted on the part of the motorist to start his vehicle moving before his green indication is lighted.  This occurs where opposing traffic has a leading green, and thus is allowed to move before the motorist in question.
Placement: 
The R10-21 sign should be placed on the signal post or pedestal supporting the signals to which it applies.  It may also be placed in an overhead position on a signal mast arm or span wire.
Closed For The Season Closed For The Season (R11-6)
Justification: 
The Closed For The Season sign shall be authorized for use on non-Interstate Rest Areas which have been closed for the season.
Placement: 
The R11-6 sign should be placed on a reflectorized red and white striped barricade closing the area.
Trucks Keep Off Shoulder Trucks Keep Off Shoulder (R11-7)
Justification: 
The Trucks Keep Off Shoulder sign shall be authorized at locations where trucks frequently travel on the shoulder but the shoulder is not capable of supporting truck traffic.
Placement: 
The R11-7 sign shall be erected immediately in advance of and at intervals throughout the restricted area.
Street Closed Street Closed (       ) to (       ) (R11-10)
Justification: 
The Street Closed (       ) to (       ) sign shall be authorized for use where the street is closed by local authorities for special activities.  Road may be used in place of Street.
Placement: 
The R11-10 sign shall be placed on a Type III barricade in the center of the street.
Snowmobile Road Closed To All Other Vehicles Snowmobile Road-Closed To All Other Vehicles (R11-11)
Justification: 
The Snowmobile Road-Closed To All Other Vehicles sign shall be authorized for use when a street or highway has been closed to all vehicular traffic other than snowmobiles and designated as a snowmobile road by the governmental agency having jurisdiction over the street or road.
Placement: 
The R11-11 sign should be mounted on a Type III, red and white reflectorized barricade in the center of the roadway, or if pavement width does not permit, at the right side of the roadway.
Wet Paint Wet Paint (R16-5)
Justification: 
The Wet Paint sign shall be authorized for use by pavement marking crews to inform motorists that pavement markings are wet and that they may not drive over them.
Placement: 
The R16-5 sign should be placed beyond intersections along the route being marked.

WARNING SIGNS

Warning Signs

Signal Out Of Service Signal Out Of Service (W3-3-3)
May be used in advance of a traffic signal which is temporarily out of service.
Police Control Ahead Police Control Ahead (W3-4)
Justification: The Police Control Ahead sign may be used in advance of a location where traffic is controlled by a uniformed police officer.  Its use should be limited to locations where drivers do not have good sight distance to the officer or would not expect police control.  The W3-4 sign shall be removed or covered when its message does not apply, or it shall be supplemented with an Effective Hours Panel, W14-20.
Placement:  When used, the W3-4 sign should be placed 250 to 750 feet in advance of the officer.
One Lane Bridge One Lane Bridge (W5-3)
The One Lane Bridge sign may be used to identify two-way bridges having a clear roadway width of less than 18 feet.  In addition, the W5-3 sign may be used to identify two-way bridges having a clear roadway width of 18 feet or more if the approach roadway geometrics create an effective width so that vehicles can not pass each other.
One Lane Underpass One Lane Underpass (W5-11)
The One Lane Underpass sign may be used to identify two-way underpasses having a clear roadway width of less than 18 feet.  In addition, the W5-11 sign may be used to identify two-way underpasses having a clear roadway width of 18 feet or more if the approach roadway geometrics create an effective width so that vehicles can not pass each other.
Expressway Ends Expressway Ends (W6-5)
Justification:  The Expressway Ends sign will be authorized for use to warn of the end of an extended length of an expressway and the beginning of a conventional highway.  The W6-5 sign should not normally be used for expressways less than 5 miles in length.  The term FREEWAY may be substituted for EXPRESSWAY.
Placement:  When used, one or two W6-5 signs should be installed within the area approximately 1500 feet to 1 mile in advance of the end of the expressway.  The (       ) Feet sign, W12-2-1, or the (       ) Mile(s) Sign, W12-2-2, should normally be used beneath the W6-5 sign.
Open Grate Bridge Open Grate Bridge (W8-16)
The Open Grate Bridge sign may be used in advance of open grate bridges to warn pedestrians and cyclists to be cautious.
Roadway Subject To Flooding Roadway Subject To Flooding (W8-18)
Justification:  The Roadway Subject To Flooding sign will be authorized for use to warn drivers that the roadway may periodically be flooded and become nonpassable.  The W8-18 sign should not be used as a substitute for closing the roadway when the proper authorities are aware that the roadway is flooded or may flood at any time.
Placement:  The W8-18 sign should be placed in advance of the area to which it applies.  It may also be placed at the last intersection prior to the area with either the (       ) Feet sign, W12-2-1, or the (       ) Mile(s) Sign, W12-2-2, placed beneath the W8-18 sign.
Watch For Ice Watch For Ice (W8-19)
Justification:  The Watch For Ice sign will be authorized temporary for use until the condition is corrected where ice occasionally forms on the roadway during the winter months due to surface or subsurface drainage or condensation problems.
Placement:  The W8-19 sign shall be placed in advance of the occasionally icy condition.  This sign shall be removed, covered, or folded during the summer months.
Horse Drawn Vehicle Horsedrawn Vehicle (W11-11)
Justification:  The Horsedrawn Vehicle sign shall be authorized for use to warn of the unexpected hazard of horsedrawn vehicles regularly crossing or using the roadway.
Plant Entrance Plant Entrance (W11-12)
Justification:  The Plant Entrance sign shall be authorized for use to denote a factory which is adjacent to the highway, but not outside of built-up industrial areas.
Its use shall be limited to locations where traffic conditions such as approach speeds, visibility, and conflicts are such that a special warning is desirable.
Park Entrance Park Entrance (W11-13)
Justification:  The Park Entrance sign shall be authorized for use to denote a driveway to a park which is adjacent to the highway.
Its use shall be limited to locations where traffic conditions such as approach speeds, visibility, and conflicts are such that a special warning is desirable.
Cemetery Entrance Cemetery Entrance (W11-14)
Justification:  The Cemetery Entrance sign shall be authorized for use to warn motorists of entrances to cemeteries which are located adjacent to the highway.
Its use shall be limited to locations where traffic conditions such as approach speeds, visibility, and conflicts are such that a special warning is desirable.
County Home County Home (W11-15)
Justification:  The County Home sign shall be authorized for use at locations where the county home, or grounds are adjacent to the highway.
Its use shall be limited to locations where traffic conditions such as approach speeds, visibility, and conflicts are such that a special warning is desirable.
Hospital Hospital (W11-16)
Justification:  The Hospital sign shall be authorized for use to indicate an access point to a hospital.
Its use shall be limited to locations where traffic conditions such as approach speeds, visibility, and conflicts are such that a special warning is desirable.
Church Church (W11-17)
Justification:  The Church sign shall be authorized for use to indicate an access point to a church.
Its use shall be limited to locations where traffic conditions such as approach speeds, visibility, and conflicts are such that a special warning is desirable.
Driveway Driveway (W11-19)
The Driveway sign shall be authorized for use to denote the presence of a driveway or alley at which the sight distance is severely restricted.
Bridle Path Bridle Path (W11-20)
The Bridle Path sign shall be authorized for use along roads where a number of horses normally walk beside or cross the roadway.
Left Turns And Cross Traffic Left Turns and Cross Traffic (W11-21)
The Left Turns and Cross Traffic sign shall be authorized for use in advance of or within areas on limited or noncontrolled multiple-lane roadways, which are contiguous to full controlled roadways.  Generally these roadways will have at grade intersections, nonsignalized with an appreciable number of left turning and cross traffic movements.  The Advisory Mile Plate Sign, W4-14, should be mounted below the sign.
No Winter Maintenance No Winter Maintenance (W14-5)
Justification:  The No Winter Maintenance sign may be used on a roadway where winter snow plowing, salting, or cindering activities are not performed.  The W14-5 sign may be removed, covered, or folded during seasons when these activities would not normally be applicable.
Placement:  The sign should be installed at the beginning of the roadway where applicable.
Congested Area Next # Miles Congested Area Next (       ) Miles (W14-6)
Justification:  The Congested Area Next (       ) Miles sign will be authorized for use on expressways and freeways to warn of unusually heavy traffic, particularly when interchanges are very closely spaced.
Placement:  The W14-6 sign may be placed in advance of and at intervals throughout the congested area.
Watch For Stopped Vehicles Watch For Stopped Vehicles (W14-7)
The Watch For Stopped Vehicles sign will be authorized for use in advance of locations where traffic queues frequently occur but are not anticipated by many drivers, especially unfamiliar drivers. 
Caution New Traffic Patterns New Traffic Patterns (W14-8)
Justification:  The New Traffic Patterns sign will be authorized for use as a temporary sign on expressways and freeways to warn drivers that the travel lanes have been revised.  When the revision covers only a short distance, the last line on the W14-8 sign may be revised to state "AHEAD."
Placement:  When used, the W14-8 sign should be placed a minimum of 775 feet in advance of the beginning of the section with revised travel lanes.
Truck Weighing Ahead Truck Weighing Ahead (W14-9)
Justification:  The Truck Weighing Ahead sign will be authorized for use in advance of a mobile or semi permanent weighing operation.  When used, the W14-9 sign shall be mounted at a minimum height of one foot above the road surface.
Size:  The standard size W14-9 sign shall be 36-inch by 36-inch on two-lane, two-way roadways and 48-inch by 48-inch on all other roadways.
Fog Area Fog Area (W14-10)
The Fog Area sign will be authorized to warn drivers of the areas where small "pockets" of fog frequently present a hazard.  It may also be used to warn of areas where smog, steam, or smoke frequently present a hazard.
Traffic Survey Ahead Traffic Survey (W14-15)
The Traffic Survey sign may be used in advance of a location where traffic is being diverted or stopped for a transportation-related survey.
PA CleanWays PA CleanWays
This non-profit organization helps organizations and communities to keep their areas of Pennsylvania free from litter and trash.  Since PENNDOT's Adopt-a-Highway program only addresses state-maintained highways, PA CleanWays addresses any local highway.  When an organization adopts a section of highway to keep clean, one of these signs are installed.

CONSTRUCTION AND MAINTENANCE GUIDE SIGNS

Construction and Maintenance Guide Signs

Arrow Arrow (W20-8)
Justification:  The Arrow sign shall be authorized for use to channelize traffic at locations where the lateral displacement of vehicular traffic is required, such as temporary road endings and within construction or maintenance areas.
Placement:  When this sign is used on a transition, the arrow shall point upward at a 45o angle.
Temporary Roadway Ahead Temporary Roadway (W20-9)
Justification:  The Temporary Roadway sign shall be authorized for use when a temporary roadway around the construction site has been provided.
Overlay panels may be used to indicate the distance.  Details of alternate distances are provided in § 23.611 of this Title (relating to distance panels).  In lieu of exact distances the legend "ahead" may be used as a final alternative.
Work Area Ahead Work Area Ahead (W21-7)
The Work Area Ahead sign shall be authorized for use in advance of obstructions or restrictions that a motorist may encounter at construction, maintenance, or utility work areas.  The 48-inches by 48-inches size may indicate the actual distance in lieu of the legend "AHEAD."
No Guard Rail No Guard Rail (W21-9)
Justification:  The No Guard Rail sign shall be authorized for use on new construction where guard rails are scheduled for installation, but have not been installed prior to opening the highway for traffic.  It shall also be used where existing guard rail has been removed for maintenance and is scheduled for replacement.
Placement:  When used, this sign shall be placed in advance of the condition and at intervals throughout the area.  Signs shall be removed when the new guard rails are installed.
Bridge Inspection Ahead Bridge Inspection Ahead (W21-11)
Justification:  The Bridge Inspection Ahead sign will be authorized for use in advance of a bridge where bridge inspectors are either inspecting the bridge roadway or an overhead structure or where it is necessary to park a bridge inspection vehicle on the roadway.
Placement:  When used, the W21-11 sign should be placed at the location where the Work Area Ahead sign W21-7, is normally stipulated in Chapter 203 (relating to traffic control in construction areas).

With Pennsylvania digging (no pun intended) itself out of the worst roads designation that Overdrive magazine's readers thrust upon the Commonwealth, these signs have become regular fixtures on the roadsides.  The two that are becoming commonplace at construction zones are the following:

Slow Down My Daddy Works Here Slow Down My Mommy Works Here

In a change from the standard "Give Them a Brake" construction zone safety campaign, PENNDOT has begun to use the "Slow Down, My [parental unit] Works Here" signs to tug at the heart strings of drivers and make them slow down.

Another sign that you might find at long-term construction project sites are the web site information signs.  These tell the motoring public the web site address of the project that they are about to enter, so they can keep informed of the progress of the work and any traffic problems that might be created.  Here are a few that have been and are used along a few highways in Western Pennsylvania:

I 70 Smithton High Level Bridge construction US 22 widening in Westmoreland County US 30 reconstruction in Westmoreland County

In December 2002, PENNDOT Act 229 was signed into law to toughen work zone laws in the Commonwealth.  The first part of the act went into effect on February 21, 2003, when motorists approaching a work zone that had the left sign preceding the construction area, were required to turn on their headlights.  Failure to do so could result in a $25 fine, but only for those pulled over for a primary moving violation.  June 23, 2003 was the day the rest of the law went into effect, and calls for a 15-day driver's license suspension for motorists who are caught speeding 11 miles per hour or more above the posted speed limit in a work zone.  There will be zero tolerance for speeding in an active work zone, and motorists can now be cited for even going one mile over the posted limit.  Active work zones are ones in which workers are present.  A flashing light mounted on the middle sign will identify these areas.  At the end of the zone, the right sign will be posted.  Highway contractors are now required to install speed-monitoring signs on all Interstate work zones with a project cost of $300,000 or more.

Work Zone Turn on Headlights
Active Work Zone When Flashing
End Active Work Zone

ROUTE MARKERS AND AUXILIARY MARKERS

Route Markers and Auxiliary Markers

I 76 Interstate Route Marker (M1-1)
Justification:  The
Interstate Route Marker shall be authorized for use to mark interstate routes and intersecting highways approaching an interchange with an interstate route.
Size: 
The 36-inch by 36-inch size for one and two digit route numbers and the 45-inch by 36-inch size for three digit route numbers shall be used on the interstate route.  The 24-inch by 24-inch size for one and two digit route numbers and the 30-inch by 24-inch size for three digit route numbers shall be reserved for use on intersecting highways.
Pennsylvania places the state name in the shield; however, there are some shields without the state name which are usually installed by contractors and not PENNDOT.
US 1 US Route Marker (M1-4)
Justification:  The
US Route Marker shall be authorized for use to mark US traffic routes.
Size: 
The standard size of M1-4 shall be 24-inches by 24-inches size for one and two digit route numbers and the 30-inches by 24-inches for three digit route numbers.  The 36-inch by 36-inch size for one and two digit route numbers and the 45-inch by 36-inch size for three digit route numbers may be used on expressways.
PA 60

PA Turnpike 66

Pennsylvania Route Marker (M1-6)
Justification:  The
Pennsylvania Route Marker shall be authorized for use to mark Pennsylvania traffic routes.
Size: 
The standard size of M1-6 shall be 24-inches by 24-inches for one and two digit route numbers and the 30-inches by 24-inches for three digit route numbers.  The 36-inch by 36-inch size for one and two digit route numbers and the 45-inch by 36-inch size for three digit route numbers may be used on expressways.  Pennsylvania uses the state symbol, the Keystone, for highway marker background.  The Pennsylvania Turnpike Commission uses green on white keystones with "PA TURNPIKE" at the top on the Amos K. Hutchinson Bypass/PA 66 and the Mon-Fayette Expressway/PA 43.  Standard markers with "TOLL" at the top are still used on the James E. Ross Highway/PA 60, and were used on the other two expressways before being replaced because the "toll" connotation made drivers resist using the expressway according to the Turnpike Commission.

DESTINATION AND DISTANCE SIGNS

Destination and Distance Signs


INFORMATION SIGNS

Information Signs

City City Name Sign (I10-3)
Justification:  The
City Name Sign shall be authorized for use at entrances to cities.
Placement:  The sign shall be placed at the corporate limits of the city.
Borough Borough Name Sign (I10-2)
Justification:  The
Borough Name Sign shall be authorized for use at entrances to boroughs.
Placement:  The sign shall be placed at the corporate limits of the borough.
Village Village Name Sign (I10-3)
Justification:  The
Village Name Sign shall be authorized for use at entrances to unincorporated built-up areas which have a post office or a generally recognized name.
Township Township Name Sign (I10-4)
Justification:  The
Township Name Sign shall be authorized for use at entrances to first and second class townships.
Placement:  The sign shall be placed at the township line.
County County Name Sign (I10-5)
Justification:  The
County Name Sign shall be authorized for use at entrances to counties.
Placement:  The sign shall be placed at the county line.
River River Name Sign (I10-6)
Justification:  The
River Name Sign shall be authorized for use at major waterways and their important tributaries.  It may also be used within official rest or scenic areas where there are vantage views of the river.
Size:  The standard size of I10-6 shall be 36 inches by 12 inches.

GUIDE SIGNS

Pre-1985

Representation of an Exit 28 guide sign that was on Interstate 83

This design was utilized on the all the guide signs.  The only signs that used shields were if the exit was to an interstate highway.  Some of these type can still be seen along I-79, I-80, PA 28, PA 60, and US 422.

Representation of an Exit 7A guide sign seen on Interstate 279

This was the exit only design prior to change to the modern guide sign design.  Note how the shields are outlined, which began to be used in the 1980s.  Before that, only Interstate shields were put on guide signs with other routes listed as "US" and "PA."  This sign could be seen at Exit 5B until its replacement in 2001.

The newer signs, as regulated by the Manual of Uniform Traffic Control Devices, are seen more now.  PENNDOT has been replacing the signs when construction is completed.  Below are some of the more unusual expressway signs seen in Pennsylvania.

1985-Present

Representation of the Exit 1 guide sign on PA 60

This design can be seen on PA 60 from Exit 1 to Exit 8.  What is also more unusual is that the lighting for the signs is from the top instead of the bottom.  The only state highways that have their exits numbered are PA 28, PA 60, PA 309 (Crossvalley Expressway), PA 378, and PA 581.

Representation of Exit 7 guide sign on the Pennsylvania Turnpike

This design is used on the mainline Turnpike only.  It lists the name of the interchange and then the usual interchange information. The old signs were designed like the pre-1980s ones.  However, the Turnpike did not replace their signage until the early 1990s.  The New Stanton exit signs were not replaced until 2000.
Representation of an HOV exit guide sign on Interstate 279 This design is used on the I-279 HOV lanes.  Since the lanes are so close to the mainline, PENNDOT chose to designate the exits with the HOV symbol.  Some of the signs use just the symbol in the corner, some say "Exit(s)," and some say "Restricted Lane Exit."

Orange Detour Red Detour  Blue Detour Black Detour Green Detour

Emergency detour signs guide motorists off the expressway and back to the nearest available expressway entrance.  They are used only during those occasions when the expressway must be closed due to crashes, flooding, or other emergency conditions.  The signs to the left represent some of the color-coded routes.

Emergency Cellular Turnpike Emergency Cellular SmarTraveler Cellular

Emergency cellular telephone signs inform motorists of the telephone number which will connect them with area emergency services.  The sign with *11 are used along the Pennsylvania Turnpike, and signs with *12 used to be posted along expressways in the Pittsburgh area.  The third sign appears on Philadelphia area expressways to advise travelers the number to use to call SmarTraveler for traffic conditions.

SCHOOL SIGNS

School Signs


TRAFFIC SIGNALS

Traffic Signals

Current style of PA signals The current layout is to have all yellow signals, 12 inch indicators, on mast arms with a black back plate.  The turn signal will cycle green arrow, yellow arrow, then red.  During flash mode, turn signals will be entirely out as Pennsylvania does not flash arrows.  In cities and towns, this convention is not always followed.  Where mast arm installations are not feasible, cable hung installations use the same convention.
Alternate style of PA signals Although not endorsed by PENNDOT, sometimes you will come across a signal installation with turn signals that utilize red arrows.  These are usually ones installed independently by boroughs or cities.  Many installations in Philadelphia use red arrows.
Alternate style of PA signals At some smaller intersections, the "dog house" signal is utilized, since it does the job of two signals in the area of one.  These are also used at large intersections where a route will leave one alignment and turn onto another, to keep the traffic flowing.
Strobe signals At some intersections you might come across signals with strobe bars in the red light housing.  These are mainly used where there is a high number of accidents due to "red light running."  I know of two instances where these are used:  US 30 at Beatty Road in Greensburg and US 22 at Resort Plaza Drive in Blairsville.
Emergency Signal Where fire stations are located along busy highways, signals such as these may be placed.  You aren't seeing things, in standard mode a yellow indicator flashes in the place of the green indicator.  When an emergency vehicle needs access, the signal goes to yellow then red and back to flash after the vehicle has safely entered the highway.  I have also seen this type used at plant and truck terminal entrances.
Ramp Meter Although not extensively used in Pennsylvania, there are two places that use traffic signals as ramp meters:  I-476 in Philadelphia and US 22 in Allentown-Bethlehem.  Ramp meters have been talked about for years for being the solution to traffic jams in Pittsburgh caused by the Fort Pitt and Squirrel Hill Tunnels.  The signals are coordinated to allow only a certain number of cars onto the expressway so as to regulate the flow of traffic and to avoid congestion.  Usually when the signal turns green, only one car may enter the flow of traffic.  Other parts of the country have more extensive systems in operation, and can be explored on Adam Froehlig's Ramp Meters page.

Pennsylvania complies with the Federal Highway Administration's guidelines for signaling of highways.  Below are some exceptions that are not covered in the United States Manual of Uniform Traffic Control Devices.

Representation of old signals Early layouts had all the signals on wires.  The turn signal would cycle green arrow and red light (this was a protected turn), then yellow arrow, then red.  These are still in existence today, but are being replaced slowly.
Representation of old signals Some of the early turn signals would use a circular yellow indicator instead of an arrow.  There is still an example of this in use at the intersection of PA 982 and Latrobe-Derry Road.
Representation of old McKeesport signals Older signals around the McKeesport area have an unusual sequence.  They still maintain green-yellow-red progress, but add a small delay in between each indication.  Coming up to one that just changed yellow, one might think that the signal is in flash mode.
Representation of old Pittsburgh signals Older Pittsburgh signals used to use a weird sequence.  The signals would go green-green/yellow-yellow-red.  The odd green/yellow phase was meant as a pedestrian phase to alert them that the signal would be changing to red and not to cross.  However, motorists detested the sequence and felt it was too confusing, so it was axed in the mid-1980s.  Current Pittsburgh signals, and hold-overs from that era use the green-yellow-red sequence.

Links:
Pennsylvania Highways Gallery
Pennsylvania Manual of Uniform Traffic Control Devices
United States Manual of Uniform Traffic Control Devices
The Highway Makeover-Pennsylvania - C. C. Slater
Highway Route Markers
- James Lin
Manual of Traffic Signs - Richard C. Moeur
1946 Pennsylvania Road Signs - C. C. Slater
SignMaker - Scott Oglesby


Back to Pennsylvania Highways
Page updated March 25, 2004.
Content and graphics copyright © Jeffrey J. Kitsko. All rights reserved.
Background courtesy of C. C. Slater.
Descriptions for the Regulatory, Warning, Construction and Maintenance, Route Markers and Auxiliary Markers, and Information signs were taken from the Pennsylvania "Manual on Uniform Traffic Control Devices."