US 6
Grand Army of the Republic Highway


This highway was one of the longest US highways which stretched from Cape Cod all the way to Los Angeles until 1964.  It was signed in 1926 when the US Highway System was created and in the early years its western terminus was in Erie.  It turned at Union City and followed the current PA 97 alignment and ended at US 20.  In 1932, it was placed on its current alignment to Ohio.

In the 1920s, the highway was mostly complete, except for sections that were under construction:  near Columbus and between Hawley and Milford.  Then there were the sections that were unimproved:  between Sweden Valley and West Pike, and Wysox and Wyalusing.  In 1929, US 6 was under construction between Prompton and Honesdale and completed the following year.  Also at the end of the 1920s, US 6 was placed on its current routing from Wyalusing to Carbondale.  Previously, the route turned at Wyalusing and followed the current PA 706 alignment to New Milford, followed US 11 to Kingsley, and then current PA 106 to Carbondale.  The current US 6 alignment had the US 106 designation.  When US 6 was placed on its current alignment, US 106 was given to the old US 6 alignment.

In 1938, US 6 was widened from Clarks Summit to Scranton.  The next widening of the highway would occur in 1940.  In that year, it was widened in sections west of Meadville, around Warren, east of Troy, east of Tunkhannock, near Carbondale, and from Milford to Matamoras.  In 1941, US 6 changed to its current route west of Mansfield and between Port Allegheny and Smethport.  Prior to that, it used the current PA 660 alignment to US 15 to complete the route and between Port Allegheny and Smethport the current PA 46, PA 446, and PA 155 alignments.  In 1946, the route was moved to the current Business US 6 alignment between Scranton and Carbondale.  Originally, the route utilized Main Avenue and County Road between the two locations.

In 1955, the designation was moved to follow an alignment from Tunkhannock to Factoryville, which is the current alignment.  Previously, US 6 traversed what is now PA 307 and then headed east to Clarks Summit.  The next major widening project of US 6 occurred in 1957, when the following sections were completed:  Meadville to PA 98 (divided as well), around Youngville, Cambridge Springs, Kane, Smethport, Mt. Jenett, Coudersport, Honesdale, and near Towanda. It was divided near Russel Hill, and from Factoryville to Scranton.  The year 1958 also saw widening projects near Cory, Union City, and west of Mt. Jenett.

The section of US 6 from Factoryville to Scranton was built on the original Delaware, Lackawanna, and Western Railroad right of way.  In 1915 it was relocated to make way for the new highway between Clarks Summit and Hallstead.

The widening projects lasted into the 60s, when in 1960, US 6 was divided from Meadville to Conneaut Lake.  In 1965, it was divided west of Blackwalnut.  Work began in 1967 on a new alignment to bypass Corry, and was opened one year later.  The first expressway replacement project for the highway began in 1968.  A new expressway alignment was under construction from Youngsville to near Jackson Crossing.  Work on two other non-expressway alignments began in that same year in Port Allegheny and near Roulette.  These projects opened to traffic in 1969.

In 1970, US 6 was divided near the beginning of the expressway near Youngsville.  In 1971, work on a completely new alignment for the highway began north of Meadville.  It opened in 1974 along with a new upgraded section of expressway to Jackson Crossing.  In the Bicentennial year of our country, a new section of expressway opened west of Warren, and two years later another just south of Warren.  It wouldn't be until 1986, that the complete southern bypass of Warren would be opened.

In 1986, that occurred and the original US 6 became Business US 6 in 1989.

During the 1990s, US 6 did not see much work with the exception of a project in the Scranton area.  In 1994, ground was broken for a new expressway that would connect at the I-81/I-84/I-380 interchange and head to Carbondale.  This highway would be known as the Lehigh Valley Industrial Highway.  The first section of it opened from Exit 6 to east of Carbondale where it ties into the existing highway in 1996, and in October 1997 it was opened to Exit 1.  The last sections of it to open were at the I-81/I-84/I-380 interchange.  The ramps to I-84/I-380 opened in late 1998 and the ramps to I-81 opened on September 3, 1999.  The original section of US 6 from I-81 to Carbondale was designated as Business US 6.  At a dedication ceremony, the completed expressway was renamed the Governor Robert. P. Casey Highway in honor of the man who helped make it a reality.

Another new alignment of US 6 opened in October 2000.  The Tunkhannock Bypass opened which provides a faster way around the town.  The new alignment is a Super 2, which is a two-lane highway built on a four-lane right-of-way.  This is not totally an expressway, because there are traffic signals at PA 29 and PA 92.  Tioga Street through town became Business US 6.

Michael Rudolf, a resident of Tunkhannock, had this to say about the Casey Highway and Tunkhannock Bypass, "Even though PennDOT did not give the highway that name until nearly a year after it opened, residents of Tunkhannock and Wyoming County were calling it the "Casey Highway" even while it was still being built - in a derogatory way.  That's because the project was rushed through during the Casey administration, with inception, design and construction all within a few short years.  Meanwhile, Governor Casey postponed all progress on the Tunkhannock Bypass - a project that had been proposed for more than 30 years and had been planned for almost a decade.  It wasn't until Governor Tom Ridge came to office that the Tunkhannock project got back on track.  (I wouldn't be surprised if someday the Tunkhannock Bypass bears Ridge's name)."

Links:
Exit Guide
US 6 Auxiliary Routes
US 6 Pictures
National Scenic Byways:  Route 6
Pennsylvania Route 6 Tourist Association
Casey Highway Trip - C. C. Slater
Casey Highway Vidcaps - C. C. Slater
Discovering The 6 - Brian and Joanne Churchill
Historic US 6 Linesville, PA - David Brunot
JCT US 6, 19, 322 - David Brunot
Terminus of US 6 - Dale Sanderson
US 6 Junction List - Tim Reichard
Yahoo! Groups:  US 6


Information INFORMATION
Western
Entrance:
Ohio state line near Pennline.
Eastern
Entrance:
New York state line at Matamoras.
Length: 405 miles
National
Highway
System:
Union City to Carbondale
Name: Grand Army of the Republic Highway
Robert P. Casey Highway:  I-84/380 to Carbondale
Roosevelt Highway (old)
SR
Designations:
SR 0006
SR 0081:  I-84/I-380 to Exit 194
Counties: Crawford, Erie, Warren, McKean, Potter, Tioga, Bradford, Wyoming, Lackawanna, Wayne, and Pike
Expressway: Youngsville to US 62.
Warren Bypass
Concurrent with I-81 from Exit 194 to Exit 187.
Robert P. Casey Highway from Scranton to Carbondale.
Concurrent
Routes:
PA 18:  Conneaut Lake to one mile east of town
PA 285:  Conneaut Lake
US 322:  Conneaut Lake to Meadville
US 19:  one mile west of I-79 to US 6N
PA 198:  Saegertown
PA 8:  Union City
PA 89:  north of Elgin to north of Lovell
PA 27:  Pittsfield to Youngsville
US 62:  Irvine to Warren
PA 321:  Kane
PA 46:  Smethport to East Smethport
PA 155:  Port Allegheny
PA 44:  Coudersport to Sweden Valley
PA 287:  Stokesdale to Wellsboro
PA 660:  Wellsboro to east of Whitneyville
PA 14:  Troy to one mile east of town
PA 92:  Tunkhannock to Dixon
US 11:  one mile west of Factoryville to near Exit 194 of I-81
I-81:  I-84/I-380 to Exit 194
PA 191:  Honesdale
PA 590:  near Hawley
PA 434:  two miles west of Shohola Falls
US 209:  Milford to the New York state line
Former
Designations:
PA 5  (1925 - 1926):  Meadville to Waterford
PA 7  (1925 - 1926):  Waterford to the New York state line
US 106  (1926 - 1928):  Wyalusing to Scranton
PA 77  (1928 - 1932):  Ohio state line to Conneaut Lake
Bike Route G
Bicycle
Route:
PA 362 in Ansonia to PA 287 north in Stokesdale
Washington's Trail
Washington's
Trail:
Meadville to US 6N
Area Codes: 814:  Ohio state line to the McKean county line.
570:  Potter county line to the New York state line.

Back to Pennsylvania Highways
Back to Pennsylvania United States Highways
Page updated March 13, 2004.
Content and graphics, unless otherwise noted, copyright © Jeffrey J. Kitsko. All rights reserved.
Information sign and US shield courtesy of Richard C. Moeur.
Washington's Trail shield courtesy of Bruce Cridlebaugh.
Information courtesy of the Pennsylvania Department of Transportation, Rand McNally, and Len Pundt.