Page 51

OPERATING PROCEDURES

To reset the power breaker :

  1. Push the Power Breaker Open button until the alarm bell stops ringing.

  2. Push the Power Breaker Closed button.

STOPPING ENGINE

  1. Move the throttle handle to IDLE.

  2. Open the Generator Field circuit breaker on the master controller stand.

  3. Move the Engine Control Switch to START.

  4. Press the STOP button on the Engine Control Panel.

CATION : TO PREVENT ENGINE INJECTION DAMAGE NEVER TURN OFF THE FUEL PUMP BREAKER TO SHUT DOWN THE ENGINE.

  1. To shut down all engines when in multiple-unit operation, move the M.U. Emergency Shutdown Switch on the master controller to SOP. The Emergency Shutdown Switch must be in RUN before attempting to start the engine.

BEFORE LEAVING LOCOMOTIVE

  1. Apply the hand brake and release the air brakes after uncoupling from the train.

  2. Leave the throttle in IDLE and the reverse handle in OFF. Remove the reverse handle after moving to OFF.

  3. Open all switches and circuit breakers.

  4. Close the windows and doors.

  5. Open the battery switch.

ON TO PAGE 52
BACK TO PAGE 50
BACK TO TABLE of CONTENTS