-
The
name of the Society shall be:- NEW ZEALAND SOCIETY OF GUNSMITHS INCORPORATED,
hereafter referred to as the Society.
REGISTERED OFFICE
- The Society shall at all
times have a registered office, and notice of the situation thereof
and any change of the situation thereof shall be given by the Secretary
to the Registrar of Incorporated Societies Wellington.
AIM
AND OBJECTIVES
- The aims and objectives
of the Society shall be:
- To establish,
maintain and advance the profession of gunsmithing and to promote in
any manner which the society thinks fit the interests of gunsmithing
in New Zealand.
- To provide a common
ground for members to interchange their knowledge and means for them
to contribute to the future advancement of Technology in Gunsmithing.
- To provide forums
for the presentation and discussion of Gunsmithing papers, promote continuing
education programmes, and the development and maintenance of Gunsmithing
standards, recommended practices and information reports, provide or
arrange appropriate advice and produce publications resulting from this
work.
- To grant grades
of membership to members of the Society in recognition of their proficiency
in Gunsmithing, other related activities, or in any matters relating
to the duties of a Gunsmith.
- To grant prizes
for excellence and promote scholarships in relation to any subjects
of study relating to Gunsmithing or to the duties of a Gunsmith.
- Promote health,
safety & responsibility in the care, handling & use of firearms
& related equipment.
- To associate with
or co-operate with or become a member of any other organisation for
the pursuit of any common interest.
- To do all such
other things as may be necessary, incidental or conducive to the attainment
of the society aims and objectives.
MEMBERSHIP
- The society
shall consist of FELLOW, MEMBER, ASSOCIATE, being graded members, STUDENT
and AFFILIATE being non graded members, including Technologists, Technicians
and craft/ tradespersons, health, safety, sales and purchasing staff,
teachers, students, cadets and apprentices. Industrial and Government
bodies provide support to the aims of the society by becoming affiliates.
MEMBERSHIP
QUALIFICATIONS
5.1
FELLOW "FSG" - Fellows shall comprise persons who:-
- have had
at least seven years experience in a position of major responsibility
in charge of Nationally important Gunsmithing or other associated activities,
or
- Have been in charge
of the design and development of a gunsmithing produce of Nationally
recognised importance, Have high education qualifications in Gunsmithing
and have made a noteworthy contribution to the science of Gunsmithing
in New Zealand, or
- Have contributed
to gunsmithing, or other associated activities in New Zealand to an
exceptional degree as a result of an extensive career in positions of
responsibility and,
- Have otherwise
satisfied the Council of their worthiness for election to this grade.
5.2
MEMBER "MSG"
- members shall comprise persons who:-
- Hold an
Engineering or Science degree, diploma or equivalent qualification accepted
by the Council for this purpose, or
- Are in the opinion
of the Council otherwise appropriately trained and skilled for, and
have had not less than five years experience in Gunsmithing or other
associated technical activities and are qualified for responsible activity
in design, research, development, manufacture, commissioning, application,
operation, repair, maintenance, restoration, sales, purchasing, health,
safety or technical/education/instruction/teaching as they relate to
Gunsmithing. Ammunition, Reloading or,
- Are in the opinion
of the Council engaged in prominent responsible commercial or administrative
activities in which they co-operate with Gunsmiths in furthering the
objects of the society, and
- Have otherwise
satisfied the Council of their worthiness for election to this grade.
5.3
ASSOCIATE "ASG" - Associates shall comprise persons who:-
- Hold as
a minimum a Gunsmithing or appropriate Engineering or Science NZQA LEVEL
4 National Certificate or equivalent qualification accepted by the Council
for this purpose, or
- Are in the opinion
of the Council otherwise appropriately trained and skilled for, and
have had not less than three years experience in Gunsmithing or other
associated technical activities and are self directed, have full responsibility
for their own individual quality standards, and are qualified for responsible
activity in, design, research, development, manufacture, commissioning,
application, operation, repair, maintenance, restoration, health, safety,
sales, purchasing, or technical/education/ instruction/teaching, as
they relate to gunsmithing ammunition, reloading and,
- Have otherwise
satisfied the Council of their worthiness for election to this grade.
5.4
STUDENT - Students shall comprise persons who:-
- Are not
over twenty five years of age who are engaged in full time courses of
education or training, including cadetships and apprenticeships which
in the opinion of the Council may qualify them for membership of the
society in the grades of Associate or member, and
- Have otherwise
satisfied the Council of their worthiness for election to this grade.
| 5.5 |
AFFILIATE - Affiliates
shall comprise persons not qualifying for graded membership or civilian,
industrial and government bodies who wish to be associated with the
Society and provide support to the aims of the Society. |
DESIGNATION
OF MEMBERS
- Every
Fellow, Member or Associate of the Society ordinarily resident in New
Zealand having occasion to designate him/herself as such, may so long
as she/he continues as a member and complies with all the provisions
of these rules and bylaws, as prescribed by Council from time to time,
may state the grade to which she/he belongs to the Society according
to the following abbreviated forms, namely FSG, or MSG, or ASG, as the
case may be. Those members ordinarily resident beyond New Zealand should
use the following abbreviated forms namely FSG(NZ), MSG(NZ), or ASG(NZ)
as the case may be.
PATRON
- The Society
may elect one or more patrons.
MEMBERSHIP
APPLICATION AND ADMISSIONS
- Every
application shall be in writing addressed to the secretary.
- Applicants
should be nominated and seconded by two graded members of the Society,
but those unable to obtain proposers may nominate three referees in
lieu. Referees will usually be requested to complete a confidential
report on the applicants qualifications for membership.
- All admissions
and elections of members shall be by the Council and every applicant
for admission or election to any grade of membership shall satisfy the
Council of his/her having fulfilled the conditions specified in the
Societys rules.
MEMBERSHIP
FEES
- All
members shall pay to the Society an entry fee and annual fees.
- The amount
of the entry fee and annual fees shall be fixed annually by the A.G.M.
and shall be due for payment on the first day of May each year. entry
fee and annual fees shall be fixed annually by the A.G.M. and shall
be due for payment on the first day of May each year.
- Any member whose
fees remain unpaid on the 30th day following due date shall
automatically cease to be a member of the Society and will be removed
from the register of members.
- A levy may be imposed
by resolution at a general meeting, such levy shall not exceed two times
the annual membership fee for that year and shall be payable by the
date fixed by the resolution.
RESIGNATION
FROM MEMBERSHIP
- Any
member may resign from membership by giving notice in writing to the
secretary. such notice shall, unless otherwise expressed, take effect
as from the end of the financial year then current. No such resignation
shall relieve or discharge the member from any fees or other debts due
and payable by the member to the Society.
SUSPENSION
OR EXPULSION OF MEMBERS
- Any
member of the Society including any officer of the Society who willfully
infringes the rules, or bylaws of the Society or the rules of any organisation
with which the Society at the time is affiliated or whos conduct is
in the opinion of the Society Council derogatory or unbecoming of a
member of the Society or affiliated organisation, shall be liable to
suspension or expulsion from Society membership by resolution of the
Council.
FINANCIAL
YEAR
- The
financial year of the Society shall end on the 30th day of
April in each year.
MEETINGS
OF MEMBERS
- The Society shall
hold its A.G.M. of members within three months of the end of the financial
year. The date and venue shall be fixed by the Society Council and at
least 21 days notice shall be given to all members by the secretary.
- The business
of the A.G.M. shall be the presentation of the Presidents Report, the
Financial Report, fixing of entry and annual fees, and or levies, and
as necessary the election of Council. Other business may be dealt with
as deemed appropriate by the Council.
MEETINGS
OF COUNCIL
- A meeting of Council
shall be held as the affairs of the Society dictates. The dates and
venues thereof being at the discretion of the Council.
QUORUMS
- At an A.G.M. a
quorum shall consist of 10 percent of members entitled to vote.
- At a meeting of
the Council a quorum shall consist of not less than 30 percent of the
Council.
VOTING
- At an A.G.M. or
other General meeting the only members entitled to vote shall be Fellow,
Member, and Associate members who shall have one vote each.
- At a meeting of
the Council each officer shall have one vote.
- At all meetings
the presiding chairperson shall in addition have a casting vote.
- Members may vote
at general meetings of the Society either personally or by proxy.
- All instruments
appointing proxies shall be in writing under the hand of the appointer,
whose signature shall be attested by a witness.
- No person shall
be appointed a proxy who is not a graded member of the Society.
- a proxy may be
appointed only for a specified meeting and any adjournments thereof.
- The instrument
appointing a proxy shall be deposited at the registered office of the
Society not less than 48 hours before the time fixed for holding the
meeting at which the person named in the instrument proposes to vote.
COUNCIL
- Only Fellow, Member
and Associate members shall be eligible for election to COUNCIL.
- The COUNCIL shall
be: President, Vice President, Secretary, Treasurer, and up to ten more
COUNCIL members and these shall comprise the officers of the Society.
- The COUNCIL shall
be elected at an A.G.M. and shall hold office for three consecutive
years, and shall be eligible for re-election upon expiry of a term of
office.
- The COUNCIL shall
have the power to fill by appointment from Fellow, Member or Associate
membership any vacancy occurring as a result of any councilor who for
any reason fails to complete a term of office. Such appointment shall
be made at the Councils discretion and shall be for the duration of
the unexpired term.
AUDITOR
- The auditor who
shall not be a member of the Council, but may be a member of the Society
shall audit all accounts and statements prepared by the Treasurer.
SECRETARY
- The Secretary shall
keep a register of the names, addresses, date of birth, occupations,
and grades of Society membership of all members, shall attend the meetings
of the Council and shall keep minutes of all meetings and the records
of the Society.
- The Secretary shall
have custody of the Seal, title deeds and other documents belonging
to the Society.
- The Secretary
shall conduct Society correspondence relating to the maintenance and
promotion of its aims and objects, and make notices of meetings.
COMMON
SEAL
- The Society shall
have a common seal, kept in the custody of the Secretary.
- Whenever the Common
Seal is required to be used the Seal shall be affixed pursuant to a
resolution of the Council by the Secretary.
TREASURER
- All
monies due to the Society shall be paid to the Treasurer who shall keep
correct books of accounts and shall pay into such bank or banks as the
Council shall direct to the credit of the Society all monies received
on its behalf.
- The Treasurer shall
also submit a financial statement to the Society A.G.M. such statement
having previously been examined and certified by the Auditor.
- All payments out
of the funds of the Society shall be made by order of the Council. Cheques
drawn in the name of the Society shall be signed by not less than two
of the Council members.
- The Council members
empowered to sign cheques on behalf of the Society shall be fixed annually
at the A.G.M.
PECUNIARY
GAIN
- No member of the
Society shall derive pecuniary gain from the property or operations
of the Society. Pecuniary gain does not include the winning of trophies
or prizes.
GENERAL
POWERS
- The Council is
empowered to:-
- Subject to the
provisions of the rules of the Society, the Council shall have the sole
and entire management and superintendence of the affairs of the Society,
and of the income and property thereof, and may prescribe bylaws of
the Society.
- Subject to the
rules of the Society the Council from time to time may establish committees
to assist in the performance of its functions & duties, and delegate
to such committees any powers of the Council.
- The Secretary or
President may ex-officio be a member of any Society committee, membership
of which shall otherwise by comprised of graded members eligible to
hold such office.
- To acquire and
hold any freehold or leasehold land reasonably required for offices
or chambers for the use of the society in any place or places in New
Zealand.
- To sell, lease,
exchange or mortgage any real or personal property vested in it.
- To accept or reject
any legacy or bequest or gift whether or not such legacy, bequest or
gift is offered with or entails conditions.
- Bring or defend
any legal action.
- Raise money in
conformity with and for the purposes of these rules and in conformity
with the New Zealand Statutes. Such money shall only be raised pursuant
of a resolution of the Council or a General meeting of members.
RULES
- No Rule shall be
altered or repealed, nor shall a new rule be added except by a two-thirds
majority vote of those present and eligible to vote at an A.G.M.
- Any proposal for
alteration, repeal or addition of or to the rules shall be submitted
in writing to the Council which shall make a recommendation and report
to the A.G.M. on the proposal.
- A copy of the proposal
and the Councils report and recommendation shall be supplied by the
Secretary to each member at least 21 days prior to the date of the A.G.M.
- Should any doubt
arise concerning the interpretation of any rule or bylaw, for the time
being in force the decision of the council by way of resolution recorded
in the minutes, shall be conclusive and binding on all members of the
Society.
INDEMNITY
- The Council shall
be indemnified by the Society against all losses and expenses incurred
in or about the discharge of their duties, except such as happen by
their own willful act, neglect or fault.
WINDING
UP
- Every financial
member of the Society shall undertaken to contribute to the assets of
the Society, in the event of the Society being wound up during the period
of such membership, for payment of debts and liabilities contracted
before the time of which such membership ceased. In addition every financial
member shall contribute such amount as may be required to meet the costs,
charges and expenses of such winding up a sum not exceeding two times
the annual fees per financial member.
- The procedure leading
up to a Voluntary winding up shall be in accordance with Section 24
of the Incorporated Societies Act, 1908. A special meeting of members
shall be called for such purposes and members given 21 days notice thereof.
- If upon winding
up of the Society there remains any assets whatsoever, the same shall
be given or transferred to some other bonafide organisation to be determined
by the majority vote of members eligible to vote and present in person
at the special meeting called to wind up the Society.
PROFESSIONAL CODE
OF ETHICS
- Members honour
their responsibilities to the Society, their profession, employer, client,
colleagues and themselves.
- Members conduct
themselves with integrity and honesty to enhance the reputations of
all the objects in 1. above.
- Members honour
constraints set out in the "Fair Trading Act 1986".
- Members take positive
steps to continually upgrade their knowledge base, as a means of progressively
increasing their standard of professional competence.
- Members cooperate
willingly and support their Society including development of sound working
relationships and profile with other organisations at appropriate levels.
POLICY ON JOURNAL
ADVERTISEMENTS
- Inclusion priority
given to NZSG members.
- Revenue from Advertisements
to cover production and distribution costs. Cost will increase as circulation
increases.
- ALL advertisements
to be prepaid.
- No more than 50%
of Journal to be taken up by advertisements (i.e. 24 page Journal up
to 12 pages of Ads).
- All advertisements
to be of an acceptable quality standard and Camera ready.
THESE
CONSTITUTION RULES WERE ADOPTED BY THE NEW ZEALAND SOCIETY OF GUNSMITHS
INCORPORATED BY RESOLUTION PASSED AT A MEETING HELD ON
THE 31ST DAY OF MAY 1994
|