CONSTRUCTION NEWSLETTER

    Vol. I. No 10

Deck_Grinding_Machine.jpg (58361 bytes)    

Click on photo for a larger view

In the photo above, the concrete surface of the new bridge is being ground to achieve a smooth ride. This machine uses a drum containing many diamond blades to grind the bridge surface. Prior to grinding, a smoothness measuring device called a Profilograph maps the bumps and dips in the surface. After grinding the Profilograph measures the smoothness again to insure all the bumps are gone. Our contract requires a maximum smoothness number of 138. The average reading after grinding the northbound bridge was 78 which means we have a very smooth bridge. There is a bump at each end because one additional layer of asphalt paving will be placed on the entire project after completion of the Southbound bridge. Following the grinding for smoothness, grooves are cut into the concrete surface from side to side. These grooves help minimize hydroplaning during rain.

Now that the new bridge is being used to carry the northbound and southbound traffic, demolition of the old southbound bridge will begin. As with the northbound bridge, the deck or floor of the bridge will be removed, the old pilings will be removed, and construction of the new bridge will begin. The new bridge will be identical to the new northbound bridge.

Additional information will follow as the construction progresses. Should you have any questions, please contact me at (904)677-8740.

Sincerely,

Thomas R. White, PE

Senior Project Engineer

OUR WEB ADDRESS HAS CHANGED FOR MORE INFO AND PICTURES, VISIT OUR WEBSITE @ www.bridgepros.com/tomoka